The chemical composition of airborne particles in the UK atmosphere

doi:10.1016/0048-9697(95)04536-A

Science of The Total Environment

Volume 168, Issue 3, 30 June 1995, Pages 195-214

https://doi.org/10.1016/0048-9697(95)04536-A Get rights and content

Abstract

Published data collected over the past fifteen years relating to the elemental and ionic composition and chemical speciation of both inorganic and organic components of airborne particles collected at (predominantly urban) United Kingdom sites have been reviewed. Whilst there have been no studies of total composition and few consistent studies of major components, there are high quality long-term survey data on trace metals and some specific organic compounds. The available data are described and, where possible, a view on “typical” composition presented.

References (31)

D.V. Bates
Health indices of the adverse effects of air pollution: the question of coherence
Environ. Res.
(1992)
J.C. Chow et al.
A neighborhood-scale study of PM₁₀ source contributions in Rubidoux, California
Atmos. Environ.
(1992)
A.G. Clarke et al.
A comparison of urban and rural aerosol composition using dichotomous samplers
Atmos. Environ.
(1984)
I. Colbeck et al.
Ozone-secondary aerosol-visibility relationships in North-West England
Sci. Total Environ.
(1984)
R.M. Harrison et al.
Measurements of atmospheric HNO₃, HCl and associated species on a small network in Eastern England
Atmos. Environ.
(1990)
R.M. Harrison et al.
Deposition fluxes of lead, cadmium, copper and polynuclear aromatic hydrocarbons on the verges of a major highway
Sci. Total Environ.
(1985)
R.M. Harrison et al.
Major ion chemical composition and chemical associations in inorganic atmospheric aerosols
Environ. Sci. Technol.
(1983)
R.M. Harrison et al.
Airborne cadmium, lead and zinc at rural and urban sites in North-West England
Atmos. Environ.
(1982)
G.J. Keeler
Effect of ambient humidity on dichotomous samper coarse/fine ratios
Atmos. Environ.
(1988)
A.N. Kitto et al.
Nitrous and nitric acid measurements at sites in South-East England
Atmos. Environ.
(1992)

A.N. Kitto et al.

Processes affecting concentrations of aerosol strong acidity at sites in Eastern England

Atmos. Environ.

(1992)

P. Koutrakis et al.

Equilibrium size of atmospheric aerosol sulphates as a function of the relative humidity

J. Geophys. Res.

(1989)

A.R. McFarland et al.

Wind tunnel evaluation of the British smoke shade sampler

Atmos. Environ.

(1982)

G. McInnesG. McInnes

W.A. Van Borm et al.

Characterisation of individual particles in the Antwerp aerosol

Atmos. Environ.

(1989)

Cited by (90)

Inductive particle detection system for real-time monitoring of metals in airborne particles
2021, Sensors and Actuators A: Physical
A novel inductive particle detection system was developed for a real-time monitoring of metals in airborne particles which cannot be measured using current commercial portable devices. The detection system consists of particle sampling, particle sensing, oil circulation sections and signal processing circuit. Airborne particles of different sizes enter the system and are classified according to their sizes in the particle sampling section. Particles larger than 5 µm are collected on the oil surface and passed through the particle sensing section along with the oil circulating throughout the system. The particle sensing section was realized using a 3D multilayer solenoid connected to a high-precision inductance meter. The performance of each section was first evaluated, and then the overall performance of the system was evaluated. The results show that ferrous and nonferrous metals in airborne particles can be detected and differentiated using proposed system with minimum detectable size of 5–10 µm for Fe and 50–60 µm for Cu particles. In addition, the number concentration of Fe particles was converted and compared with the reference number concentrations measured by high-precision commercial instrument, under the metal particle generation condition. The comparison results of the system show good agreement at concentrations within its detectable range, up to 200 #/L. The proposed system and design concept demonstrated here can be widely used for the real-time and extensive monitoring of airborne metal particles in industrial workplaces.
Metal partitioning and leaching vulnerability in soil, soakaway sediments, and road dust in the urban area of Japan
2020, Chemosphere
Citation Excerpt :
However, this potential mobility ranking corresponds to the findings obtained so far during this research, except that of Pb, which exhibited the highest sorption thus higher retention capability. It may be because dissolution of soluble halide forms of Pb will release Pb2+ ions which will then quickly adsorbed on the surfaces of soil, sediment and road dust or precipitate as the low soluble sulfates i.e. PbSO4 (Harrison and Jones, 1995) resulting into the transformation of labile form into non-labile or less labile forms. Cu showed the second highest value of sorption coefficient owing to its preference for humic substances (Phillips and Chappie, 1995) rather than oxides to form complexes.
Isotope dilution techniques (IDT) and sequential extraction procedures (SEPs) were compared to apprehend the differences between two techniques in determining metal exchangeability and vulnerability to pollute the urban groundwater. For this purpose, soil (n = 2), “soakaway” sediment deposited in the artificial infiltration facilities (AIF) (n = 4), and road dust (n = 2) were sampled from Tokyo metropolitan. Sorption coefficients of four metals (Cu, Zn, Cd and Pb) were assessed through isotopic exchangeability (E-value) and potential mobile pool i.e. addition of exchangeable, reducible and oxidizable fraction obtained by Community Bureau of Reference (BCR)-procedures. The E-value for the three samples were found smaller than the potential mobile pool but were higher than BCR-exchangeable fractions. The use of strong extractants are likely to play an active role in the disagreement between SEPs and IDT. IDT accounts for the isotopic exchangeability while BCR provides information of vulnerability of metals associated with different fractions that can leach under different environmental conditions. Sorption coefficients measured in soakaway sediment was found comparable to soil thus likely to retain metals. However, as variability in environmental conditions is likely to affect Kd, the soakaway sediment may become an active metal source in future rather than acting as the permanent sink. The study concludes that there is the possibility of errors while predicting metal vulnerability to groundwater with both techniques and thus a model compliance integrating the virtue of both techniques will be a way forward.
Development of enhanced emission factor equations for paved and unpaved roads using artificial neural network
2019, Transportation Research Part D: Transport and Environment
Citation Excerpt :
However, the formation of PM pollution is a very complex and nonlinear phenomenon due to physical and chemical processes that occur in the atmosphere, which implies that the conventional statistical methods based on the linear relationship of dependent and independent variables have a limitation insofar as accurately predicting the PM concentration/amount. According to several studies, road dust is an important source of PM and has a significant impact on air quality (Harrison and Jones, 1995; Chow et al., 1996). Watson and Chow (2000) identified unpaved and paved roads as the major sources of PM10 and PM2.5.
Road dust is a primary source of PM that is having a significant impact on human health and air quality. In order to efficiently develop PM control strategies, it is critical to improving the ability to estimate the emission levels of PM resuspended from paved and unpaved roads. The U.S. Environmental Protection Agency (EPA) has developed emission factor equations to quantify the magnitude of PM for paved and unpaved roads based on multiple linear regression (MLR) models. However, the MLR models are not suitable to capture the complex and non-linear mechanisms of PM emissions, thereby limiting the accuracy of the MLR-based PM prediction models. This paper is to present a method to improve the quality of the existing EPA emission factor equations for paved and unpaved roads by employing an artificial neural network (ANN). The presented method consists of the following steps: data processing, ANN model training, and validation of the presented method through data testing. The data utilized for the case study were retrieved from the database used by the EPA to generate PM₁₀ emission factor equations for the paved and unpaved roads for a fair comparison. The presented method was evaluated by demonstrating its improved performance as shown in the coefficient of determination (R²) and the root mean square error (RMSE) values. The empirical findings of the case study verified that the presented method using the ANN model is capable of improving the quality of the EPA emission factor equations, resulting in higher R² and lower RMSE values for both paved and unpaved roads. The expected significance of this paper is that the presented method improves the ability to develop more reliable emission factor equations for predictable PM levels that can help agencies establish enhanced PM control strategies.
Real-time monitoring of atmospheric ammonia during a pollution episode in Madrid (Spain)
2018, Atmospheric Environment
Citation Excerpt :
Atmospheric ammonia (NH3) is an alkaline gas that is present in the atmosphere where it plays a significant role as neutralizing agent of acidic species, forming particle-phase ammonium (NH4+) salts. NH3 preferentially reacts with sulfuric acid (H2SO4) to form stable ammonium sulfate ((NH4)2SO4) and/or ammonium bisulfate (NH4HSO4) (Harrison and Jones, 1995). When excess NH3 is available it combines with nitric acid or chloric acid to generate ammonium nitrate (NH4NO3) and ammonium chloride (NH4Cl), respectively.
Ammonia emissions play an important role in the formation of secondary inorganic aerosols. Road traffic is considered to be one of the main sources of ammonia in urban environments, although other sources have been identified. An experimental study was carried out in a suburban area of Madrid (Spain), in which high time resolution measurements of ammonia concentrations were obtained using Cavity-Enhanced Laser Absorption Spectroscopy. Mean hourly ammonia concentration during the study period of December 2014 to January 2015 was 2.17 ± 1.70 μg m⁻³, with 9.3 μg m⁻³ being the maximum recorded value for a period of 10 min. Stagnant conditions dominated the measurement period and influenced the observed concentrations. Other gaseous and particulate matter parameters, including size-segregated mass concentration, particle number size distribution and aerosol chemical composition (non-refractory species) were monitored at the same site in order to support the data interpretation. No relationships with traffic-related pollutants were found, however, a nearby wastewater treatment plant was identified as the main source affecting the observed ambient concentrations of ammonia and aerosols. Ammonia emissions from wastewater treatment plants may be significant annual sources of ammonia in urban environments. High-resolution observations of air chemistry help to resolve emission inventories in urban environments, and improve the effectiveness of policy to reduce secondary inorganic aerosols.
Mercury in atmospheric aerosols: A preliminary case study for the city of Krakow, Poland
2015, Comptes Rendus Chimie
The level of contamination by mercury associated with airborne particulate matter in Krakow was determined. Samples of PM10 were collected on quartz filters using low-volume samplers. The total particulate mercury (TPM) concentrations in collected samples were determined by mercury analyser MA-3000 (Nippon Instruments Corporation). The reported results include also data on the carbonaceous aerosol and inorganic ions concentrations during the reported sampling campaign. The average concentration of the Total Particulate Mercury (TPM) in Krakow (Poland) was 0.22 ng·m⁻³ (during the period from 22 February to 2 March) and 0.49 ng·m⁻³ (on 3 March). A marked correlation between TPM and elemental carbon (EC) as well as with Cl^– was found. No significant association of the TPM with NO₃^– and SO₄^2– could be shown. The dry deposition flux of mercury was calculated as an average over the sampling period and was 47.3 ng·m⁻²·d⁻¹.
Rock-magnetic properties of topsoils and urban dust from Morelia (>800,000 inhabitants), Mexico: Implications for anthropogenic pollution monitoring in Mexico's medium size cities
2013, Geofisica Internacional
Citation Excerpt :
Additionally, the ultrafine particles (<0.1 mm, PM0.1) are proven to have worse health effects than fine particles (<2.5 mm, PM2.5) (Harrison and Yin, 2000; Lu et al., 2008; Wichmann and Peters, 2000). Furthermore, these particles can lodge in their structure other toxic metals like Pb, Zn, Ba, Cd and Cr (Harrison and Jones, 1995; Maher et al., 2008; Muxworthy et al., 2003) probably due to the affinity of Fe oxides with trace metals (Gautam et al., 2005; Hunt et al., 1984; Lu et al., 2007; Ma and Rao, 1997; Meena et al., 2011). In particular, Pb, Cu and Zn and ferromagnetic minerals are commonly associated with industrial activity and traffic pollution (Beckwith et al., 1986; Hanesch and Scholger, 2002; Li et al., 2001; Lu et al., 2005).
En el presente trabajo, investigamos la correlación entre algunos parámetros magnéticos y el nivel de contaminación por metales pesados en suelos urbanos de la ciudad de Morelia, en el occidente de México. El estudio magnético fue llevado a cabo en 98 muestras urbanas provenientes de diferentes tipos de uso de suelo. La mayoría de las muestras contienen minerales ferrimagnéticos como responsables de la magnetización, pertenecientes probablemente a las soluciones sólidas de las titanomagnetitas/ titanomaghemitas. Esto es inferido a partir de las mediciones de susceptibilidad en función de la temperatura y de los experimentos de magnetización remanente isotérmica (MRI). Estas mediciones indican además, que la mayoría de las muestras se saturan casi completamente antes de los 300 mT. Adicionalmente, los valores S_-200 (S_-200 = IRM_-200/SIRM, donde IRM_-200= magnetización a campo inverso de 200 mT después de la saturación magnética) se encuentran entre 0.7 y 1.0, característicos de minerales de baja coercitividad magnética. Las curvas promedio de magnetización remanente isotérmica de saturación (SIRM) pueden ser usadas como un indicador del nivel de contaminación, ya que estas curvas muestran diferentes valores de saturación de acuerdo al nivel de contaminación por metales pesados: Cu, Ni, Cr y Sr. Estas asociaciones de (titano)magnetitas con metales pesados fueron observadas bajo el Microscopio Electrónico de Barrido, revelando algunos agregados complejos en lugar de las esférulas detectadas comúnmente.
In this work, we investigate the correlation between some magnetic parameters and the level of contamination by heavy metals in urban soils from Morelia city, western Mexico. The magnetic study was carried out on 98 urban soils samples belonging to distinct land uses. Most of analyzed samples contain ferrimagnetic minerals as the responsible for magnetization, most probably corresponding to the titanomagnetites/ titanomaghemites solid solutions. This is inferred from the susceptibility vs. temperature measurements and the isothermal remanent magnetization (IRM) experiments. These measurements also indicate that most of samples are almost completely saturated before 300 mT. Additionally, the S_-200 values (S_-200 = IRM_-200/ SIRM, where IRM_-200= Back-field of 200 mT after magnetic saturation) are between 0.7 and 1.0, characteristic of low coercivity magnetic minerals. The averaged saturation isothermal remanent magnetization (SIRM) curves can be used as an indicator of pollution level, as these curves show different saturation values according to the level of contamination by heavy metals: Cu, Ni, Cr and Sr. These associations of (titano)magnetite with heavy metals were observed by Scanning Electron Microscope revealing some complex aggregates rather than commonly detected spherules.

View all citing articles on Scopus

View full text

The chemical composition of airborne particles in the UK atmosphere

Abstract

Environ. Res.

Atmos. Environ.

Atmos. Environ.

Sci. Total Environ.

Atmos. Environ.

Sci. Total Environ.

Environ. Sci. Technol.

Atmos. Environ.

Atmos. Environ.

Atmos. Environ.

Atmos. Environ.

J. Geophys. Res.

Atmos. Environ.

Atmos. Environ.