ERJ
HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
 QUICK SEARCH:   [advanced]


     


This Article
Right arrow Full Text (PDF)
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Right arrow Citation Map
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Citing Articles
Right arrow Citing Articles via HighWire
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Miller, M.
Right arrow Articles by Sigsgaard, T
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Miller, M.
Right arrow Articles by Sigsgaard, T
Eur Respir J 1994; 7: 198-201
Copyright © ERS Journals Ltd 1994


Original Articles

Prevention of thermal and condensation errors in pneumotachographic recordings of the maximal forced expiratory manoeuvre

MR Miller and T Sigsgaard

When recording respiratory manoeuvres using a pneumotachograph (PT), it is customary to heat the pneumotachograph head to avoid condensation errors. It is technically demanding to heat the PT correctly, and this increases the complexity of the equipment. We have studied whether a simpler method can eradicate condensation errors and preserve thermal stability of the PT. We tested the accuracy of a PT by recording the discharge of 1,000 ml of air through the PT before and after a subject had blown through it, thus causing both condensation within the PT and a rise in its temperature. We then determined whether the thermal and condensation errors could be avoided by placing the PT, between blows, on a fan that was blowing air at a constant 1.65 l.s-1. With ambient temperature at 20 degrees C, a single blow through the PT was found to cause a subsequent 4% over-reading in volume, due to condensation and temperature changes in the PT. After five consecutive blows the error was 7%. Placing the PT on the fan for 15 s after a single blow abolished these errors, whereas a wait of 15 s did not. At an ambient temperature of 14 degrees C there was a 5% over-reading of volume after a single blow, and an over-reading of 9% after five blows. At an ambient temperature of 26 degrees C these errors were 3 and 5%, respectively. All of these errors were abolished by placing the PT on the fan for 15 s and 30 s, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)


This article has been cited by other articles:


Home page
J. Appl. Physiol.Home page
S. K. Kjaergaard, O. F. Pedersen, M. R. Miller, T. R. Rasmussen, J. C. Hansen, and L. Molhave
Ozone exposure decreases the effect of a deep inhalation on forced expiratory flow in normal subjects
J Appl Physiol, May 1, 2004; 96(5): 1651 - 1657.
[Abstract] [Full Text] [PDF]


Home page
Eur Respir JHome page
M.R. Miller, T. Sigsgaard, O. Omland, and O.F. Pedersen
Time domain and flow indices of bronchial hyperresponsiveness: association with asthma symptoms, atopy and smoking
Eur. Respir. J., July 1, 2002; 20(1): 86 - 91.
[Abstract] [Full Text] [PDF]


Home page
Eur Respir JHome page
M.R. Miller, J. Lloyd, and P. Bright
Recording flow in the first second of a maximal forced expiratory manoeuvre: influence of frequency content
Eur. Respir. J., March 1, 2002; 19(3): 530 - 533.
[Abstract] [Full Text] [PDF]


Home page
Am. J. Respir. Crit. Care Med.Home page
M. R. MILLER, O. F. PEDERSEN, and P. H. QUANJER
The Rise and Dwell Time for Peak Expiratory Flow in Patients with and without Airflow Limitation
Am. J. Respir. Crit. Care Med., July 1, 1998; 158(1): 23 - 27.
[Abstract] [Full Text] [PDF]


Home page
J. Appl. Physiol.Home page
M. R. Miller, O. F. Pedersen, and T. Sigsgaard
Spirometry with a Fleisch pneumotachograph: upstream heat exchanger replaces heating requirement
J Appl Physiol, April 1, 1997; 82(4): 1053 - 1057.
[Abstract] [Full Text] [PDF]




HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
Copyright © 1994 by the European Respiratory Society.